简体 | 繁體 | FastenerExpo |
English Deutsch Français 日本語 Italiano Español 한어 Português Русский بالعربية Türkçe
All Categories

Click Specification

Unit:mm

Type E - Keys with both ends round with holes for two retaining screws

IS 2048 (E) - 1983

Display drawing:

印标IS 2048 (E) - 1983 IS2048 2048IS Type E - Keys with both ends round with holes for two retaining screws
印标IS 2048 (E) - 1983 IS2048 2048IS Type E - Keys with both ends round with holes for two retaining screws
Normal size
b
8 10 12 14 16 18 20 22 25 28 32
b max=nominal size
min
h max=nominal size
min
s min
max
L min
max
d3
d4
d5
8 10 12 14 16 18 20 22 25 28 32
7.964 9.964 11.957 13.957 15.957 17.957 19.948 21.948 24.948 27.948 31.938
7 8 8 9 10 11 12 14 14 16 18
6.91 7.91 7.91 8.91 9.91 10.89 11.89 13.89 13.89 15.89 17.89
0.25 0.4 0.4 0.4 0.4 0.4 0.6 0.6 0.6 0.6 0.6
0.4 0.6 0.6 0.6 0.6 0.6 0.8 0.8 0.8 0.8 0.8
18 22 28 36 45 50 56 63 70 80 90
90 110 140 160 180 200 220 250 280 320 360
3.4 3.4 4.5 5.5 5.5 6.6 6.6 6.6 9 11 11
6 6 8 10 10 11 11 11 14 18 18
M3 M3 M4 M5 M5 M6 M6 M6 M8 M10 M10
Normal size
b
36 40 45 50 56 63 70 80 90 100
b max=nominal size
min
h max=nominal size
min
s min
max
L min
max
d3
d4
d5
36 40 45 50 56 63 70 80 90 100
35.938 39.938 44.938 49.938 55.926 62.926 69.926 79.926 89.913 99.913
20 22 25 28 32 32 36 40 45 50
19.87 21.87 24.87 27.87 31.84 31.84 35.84 39.84 44.84 49.84
1 1 1 1 1.6 1.6 1.6 2.5 2.5 2.5
1.2 1.2 1.2 1.2 2 2 2 3 3 3
100 110 125 140 160 180 200 220 250 280
400 400 400 400 400 400 400 400 400 400
14 14 14 14 14 14 18 18 22 22
20 20 20 20 20 20 26 26 33 33
M12 M12 M12 M12 M12 M12 M16 M16 M20 M20

Alternative history

IS 2048D - 1983 IS 2048E - 1983
Send Inquiry

Similar Standards

1 Parallel Keys, Deep Pattern - Type A [DIN]
DIN 6885-1 (A) - 2021 		Parallel Keys, Deep Pattern - Type A

View Suppliers
2 Parallel Keys, Deep Pattern - Type A [DIN]
DIN 6885 (A) - 1968 		Parallel Keys, Deep Pattern - Type A

View Suppliers
3 Parallel Keys, With Taper and One Step Hole For Clamping Sleeve - Type J [DIN]
DIN 6885 (J) - 1968 		Parallel Keys, With Taper and One Step Hole For Clamping Sleeve - Type J
4 Thin Parallel Keys [ISO]
ISO 2491 - 1974 		Thin Parallel Keys
5 Parallel Keys, With Taper and One Step Bore For Fixation Screw - Type G [DIN]
DIN 6885 (G) - 1968 		Parallel Keys, With Taper and One Step Bore For Fixation Screw - Type G
6 Slot stones, loose - Form B [DIN]
DIN 6323 (B) - 2003 		Slot stones, loose - Form B
7 Rectangular Key [DIN]
DIN 6880 - 1975 		Rectangular Key
8 Metric Square And Pectang-Ular Keys [ASME/ANSI]
ASME/ANSI B 18.25.3M - 1998 (R2008) 		Metric Square And Pectang-Ular Keys
9 Parallel Keys, With Taper and One Step Hole For Clamping Sleeve - Type J [DIN]
DIN 6885-1 (J) - 2021 		Parallel Keys, With Taper and One Step Hole For Clamping Sleeve - Type J
10 Parallel Keys, With Two Step Bores For Fixation Screw - Type F [DIN]
DIN 6885 (F) - 1968 		Parallel Keys, With Two Step Bores For Fixation Screw - Type F
11 Square Key [DIN]
DIN 6880 - 1975 		Square Key
12 Rectangular Key [DIN]
DIN 6880 (B) - 2011 		Rectangular Key
13 Parallel Keys, With Two Step Bores For Fixation Screw - Type F [DIN]
DIN 6885-1 (F) - 2021 		Parallel Keys, With Two Step Bores For Fixation Screw - Type F
14 Parallel Keys,With Step Bore Fore Fixation Screw - Type D [DIN]
DIN 6885-1 (D) - 2021 		Parallel Keys,With Step Bore Fore Fixation Screw - Type D
15 Parallel Keys, Deep Pattern - Type B [DIN]
DIN 6885-1 (B) - 2021 		Parallel Keys, Deep Pattern - Type B
16 Parallel Keys, With Taper and Two Step Bore For Fixation Screw - Type H [DIN]
DIN 6885-1 (H) - 2021 		Parallel Keys, With Taper and Two Step Bore For Fixation Screw - Type H
17 Flat Rectangular Key [DIN]
DIN 6880 (C) - 2011 		Flat Rectangular Key
18 Metric Interference Fit Flat Key [ASME/ANSI]
ASME/ANSI B 18.25.3M - 1998 		Metric Interference Fit Flat Key
19 Parallel Keys, With Taper and One Step Bore For Fixation Screw - Type G [DIN]
DIN 6885-1 (G) - 2021 		Parallel Keys, With Taper and One Step Bore For Fixation Screw - Type G
20 Metric square keys [ASME/ANSI]
ASME/ANSI B 18.25.1M - 1996 		Metric square keys
21 Slot stones, loose - Form A [DIN]
DIN 6323 (A) - 2003 		Slot stones, loose - Form A
22 Parallel Keys, With Two Step Bores For Fixation Screw - Type E [DIN]
DIN 6885 (E) - 1968 		Parallel Keys, With Two Step Bores For Fixation Screw - Type E
23 Parallel Keys, With Two Step Bores For Fixation Screw - Type E [DIN]
DIN 6885-1 (E) - 2021 		Parallel Keys, With Two Step Bores For Fixation Screw - Type E
24 Parallel Keys, With Taper and Two Step Bore For Fixation Screw - Type H [DIN]
DIN 6885 (H) - 1968 		Parallel Keys, With Taper and Two Step Bore For Fixation Screw - Type H
25 Square Key [DIN]
DIN 6880 (A) - 2011 		Square Key
26 Flat Rectangular Key [DIN]
DIN 6880 - 1975 		Flat Rectangular Key
27 Parallel Keys, with Step Bore Fore Fixation Screw - Type C [DIN]
DIN 6885 (C) - 1968 		Parallel Keys, with Step Bore Fore Fixation Screw - Type C
28 Parallel Keys, with Step Bore Fore Fixation Screw - Type C [DIN]
DIN 6885-1 (C) - 2021 		Parallel Keys, with Step Bore Fore Fixation Screw - Type C
29 Slot stones, loose - Form C [DIN]
DIN 6323 (C) - 2003 		Slot stones, loose - Form C
30 Parallel Keys,With Step Bore Fore Fixation Screw - Type D [DIN]
DIN 6885 (D) - 1968 		Parallel Keys,With Step Bore Fore Fixation Screw - Type D
31 Parallel Keys, Deep Pattern - Type B [DIN]
DIN 6885 (B) - 1968 		Parallel Keys, Deep Pattern - Type B
32 Parallel keys - Type III [UNI]
UNI 6605 - 1969 		Parallel keys - Type III
33 Sguare And Rectangular Thin Keys [GB]
GB 1567 - 1979 		Sguare And Rectangular Thin Keys
34 Sguare And Rectangular Thin Keys [GB]
GB /T 1567 - 2003 		Sguare And Rectangular Thin Keys
35 Square And Rectangular Keys [GB]
GB /T 1096 - 2003 		Square And Rectangular Keys
36 Parallel keys - Type II [UNI]
UNI 6605 - 1969 		Parallel keys - Type II
37 Parallel keys - Type VI [UNI]
UNI 6605 - 1969 		Parallel keys - Type VI
38 Parallel keys - Type IV [UNI]
UNI 6605 - 1969 		Parallel keys - Type IV
39 Square and Rectangular keys [GB]
GB /T 1096 - 1979 		Square and Rectangular keys
40 Parallel keys - Type V [UNI]
UNI 6605 - 1969 		Parallel keys - Type V
41 Square And Rectangular Keys [GB]
GB /T 1097 - 2003 		Square And Rectangular Keys
42 Thin parallel keys [UNI]
UNI 7510 - 1976 		Thin parallel keys
43 Flat key [UNI]
UNI 6604 - 1969 		Flat key
44 Parallel keys - Type I [UNI]
UNI 6605 - 1969 		Parallel keys - Type I
45 Square And Rectangular Keys [GB]
GB 1097 - 1979 		Square And Rectangular Keys
46 Keys couplings with prismatic Keys [GOST]
GOST 23360 - 1978 		Keys couplings with prismatic Keys
47 Type A - Keys with both ends round [IS]
IS 2048 (A) - 1983 		Type A - Keys with both ends round
48 Type B - Keys with both ends square [IS]
IS 2048 (B) - 1983 		Type B - Keys with both ends square
49 Type C - keys with both ends round with hole for one retaining screw [IS]
IS 2048 (C) - 1983 		Type C - keys with both ends round with hole for one retaining screw
50 Type D - keys with both ends square with hole for one retaining screw [IS]
IS 2048 (D) - 1983 		Type D - keys with both ends square with hole for one retaining screw
51 Type F - Keys with both ends square with holes for two retaining screws [IS]
IS 2048 (F) - 1983 		Type F - Keys with both ends square with holes for two retaining screws
52 Type G - keys with both ends square with chamfer and hole for one retaining screw [IS]
IS 2048 (G) - 1983 		Type G - keys with both ends square with chamfer and hole for one retaining screw
53 Type H - Keys with both ends square with chamfer and holes for two retaining screws [IS]
IS 2048 (H) - 1983 		Type H - Keys with both ends square with chamfer and holes for two retaining screws
54 Type J - keys with both ends square with chamfer and hole for one spring dowel sleeve [IS]
IS 2048 (J) - 1983 		Type J - keys with both ends square with chamfer and hole for one spring dowel sleeve