简体 | 繁體 | FastenerExpo |
English Deutsch Français 日本語 Italiano Español 한어 Português Русский بالعربية Türkçe
All Categories

Click Specification

Unit:mm

Thin parallel keys

UNI 7510 - 1976

Display drawing:

意大利UNI 7510 - 1976 UNI7510 7510UNI Thin parallel keys
Size ①
5
×3 		6
×4 		8
×5 		10
×6 		12
×6 		14
×6 		16
×7 		18
×7 		20
×8 		22
×9 		25
×9 		28
×10 		32
×11 		36
×12
b min
max
h min
max
s min
max
4.97 5.97 7.964 9.964 11.957 13.957 15.957 17.957 19.948 21.948 24.948 27.948 31.938 35.938
5 6 8 10 12 14 16 18 20 22 25 28 32 36
2.94 3.925 4.925 5.925 5.925 5.925 6.91 6.91 7.91 8.91 8.91 9.91 10.89 11.89
3 4 5 6 6 6 7 7 8 9 9 10 11 12
0.25 0.25 0.25 0.4 0.4 0.4 0.4 0.4 0.6 0.6 0.6 0.6 0.6 1
0.4 0.4 0.4 0.6 0.6 0.6 0.6 0.6 0.8 0.8 0.8 0.8 0.8 1.2
①,b×h
Send Inquiry

Similar Standards

1 Parallel Keys, Deep Pattern - Type A [DIN]
DIN 6885 (A) - 1968 		Parallel Keys, Deep Pattern - Type A

View Suppliers
2 Parallel Keys, Deep Pattern - Type A [DIN]
DIN 6885-1 (A) - 2021 		Parallel Keys, Deep Pattern - Type A

View Suppliers
3 Slot stones, loose - Form B [DIN]
DIN 6323 (B) - 2003 		Slot stones, loose - Form B
4 Parallel Keys,With Step Bore Fore Fixation Screw - Type D [DIN]
DIN 6885-1 (D) - 2021 		Parallel Keys,With Step Bore Fore Fixation Screw - Type D
5 Parallel Keys, With Two Step Bores For Fixation Screw - Type E [DIN]
DIN 6885 (E) - 1968 		Parallel Keys, With Two Step Bores For Fixation Screw - Type E
6 Parallel Keys, With Taper and Two Step Bore For Fixation Screw - Type H [DIN]
DIN 6885-1 (H) - 2021 		Parallel Keys, With Taper and Two Step Bore For Fixation Screw - Type H
7 Flat Rectangular Key [DIN]
DIN 6880 - 1975 		Flat Rectangular Key
8 Rectangular Key [DIN]
DIN 6880 - 1975 		Rectangular Key
9 Slot stones, loose - Form C [DIN]
DIN 6323 (C) - 2003 		Slot stones, loose - Form C
10 Parallel Keys, Deep Pattern - Type B [DIN]
DIN 6885 (B) - 1968 		Parallel Keys, Deep Pattern - Type B
11 Rectangular Key [DIN]
DIN 6880 (B) - 2011 		Rectangular Key
12 Parallel Keys, With Taper and One Step Bore For Fixation Screw - Type G [DIN]
DIN 6885 (G) - 1968 		Parallel Keys, With Taper and One Step Bore For Fixation Screw - Type G
13 Parallel Keys, With Two Step Bores For Fixation Screw - Type F [DIN]
DIN 6885-1 (F) - 2021 		Parallel Keys, With Two Step Bores For Fixation Screw - Type F
14 Parallel Keys, With Two Step Bores For Fixation Screw - Type F [DIN]
DIN 6885 (F) - 1968 		Parallel Keys, With Two Step Bores For Fixation Screw - Type F
15 Parallel Keys, With Taper and One Step Bore For Fixation Screw - Type G [DIN]
DIN 6885-1 (G) - 2021 		Parallel Keys, With Taper and One Step Bore For Fixation Screw - Type G
16 Square Key [DIN]
DIN 6880 - 1975 		Square Key
17 Parallel Keys, with Step Bore Fore Fixation Screw - Type C [DIN]
DIN 6885-1 (C) - 2021 		Parallel Keys, with Step Bore Fore Fixation Screw - Type C
18 Thin Parallel Keys [ISO]
ISO 2491 - 1974 		Thin Parallel Keys
19 Metric Interference Fit Flat Key [ASME/ANSI]
ASME/ANSI B 18.25.3M - 1998 		Metric Interference Fit Flat Key
20 Parallel Keys, With Taper and Two Step Bore For Fixation Screw - Type H [DIN]
DIN 6885 (H) - 1968 		Parallel Keys, With Taper and Two Step Bore For Fixation Screw - Type H
21 Slot stones, loose - Form A [DIN]
DIN 6323 (A) - 2003 		Slot stones, loose - Form A
22 Parallel Keys, With Two Step Bores For Fixation Screw - Type E [DIN]
DIN 6885-1 (E) - 2021 		Parallel Keys, With Two Step Bores For Fixation Screw - Type E
23 Flat Rectangular Key [DIN]
DIN 6880 (C) - 2011 		Flat Rectangular Key
24 Parallel Keys, With Taper and One Step Hole For Clamping Sleeve - Type J [DIN]
DIN 6885 (J) - 1968 		Parallel Keys, With Taper and One Step Hole For Clamping Sleeve - Type J
25 Metric square keys [ASME/ANSI]
ASME/ANSI B 18.25.1M - 1996 		Metric square keys
26 Parallel Keys, with Step Bore Fore Fixation Screw - Type C [DIN]
DIN 6885 (C) - 1968 		Parallel Keys, with Step Bore Fore Fixation Screw - Type C
27 Square Key [DIN]
DIN 6880 (A) - 2011 		Square Key
28 Parallel Keys, Deep Pattern - Type B [DIN]
DIN 6885-1 (B) - 2021 		Parallel Keys, Deep Pattern - Type B
29 Parallel Keys,With Step Bore Fore Fixation Screw - Type D [DIN]
DIN 6885 (D) - 1968 		Parallel Keys,With Step Bore Fore Fixation Screw - Type D
30 Parallel Keys, With Taper and One Step Hole For Clamping Sleeve - Type J [DIN]
DIN 6885-1 (J) - 2021 		Parallel Keys, With Taper and One Step Hole For Clamping Sleeve - Type J
31 Metric Square And Pectang-Ular Keys [ASME/ANSI]
ASME/ANSI B 18.25.3M - 1998 (R2008) 		Metric Square And Pectang-Ular Keys
32 Square And Rectangular Keys [GB]
GB 1097 - 1979 		Square And Rectangular Keys
33 Square and Rectangular keys [GB]
GB /T 1096 - 1979 		Square and Rectangular keys
34 Parallel keys - Type II [UNI]
UNI 6605 - 1969 		Parallel keys - Type II
35 Parallel keys - Type IV [UNI]
UNI 6605 - 1969 		Parallel keys - Type IV
36 Sguare And Rectangular Thin Keys [GB]
GB 1567 - 1979 		Sguare And Rectangular Thin Keys
37 Sguare And Rectangular Thin Keys [GB]
GB /T 1567 - 2003 		Sguare And Rectangular Thin Keys
38 Parallel keys - Type VI [UNI]
UNI 6605 - 1969 		Parallel keys - Type VI
39 Flat key [UNI]
UNI 6604 - 1969 		Flat key
40 Square And Rectangular Keys [GB]
GB /T 1096 - 2003 		Square And Rectangular Keys
41 Parallel keys - Type III [UNI]
UNI 6605 - 1969 		Parallel keys - Type III
42 Square And Rectangular Keys [GB]
GB /T 1097 - 2003 		Square And Rectangular Keys
43 Parallel keys - Type V [UNI]
UNI 6605 - 1969 		Parallel keys - Type V
44 Parallel keys - Type I [UNI]
UNI 6605 - 1969 		Parallel keys - Type I
45 Keys couplings with prismatic Keys [GOST]
GOST 23360 - 1978 		Keys couplings with prismatic Keys
46 Type A - Keys with both ends round [IS]
IS 2048 (A) - 1983 		Type A - Keys with both ends round
47 Type B - Keys with both ends square [IS]
IS 2048 (B) - 1983 		Type B - Keys with both ends square
48 Type C - keys with both ends round with hole for one retaining screw [IS]
IS 2048 (C) - 1983 		Type C - keys with both ends round with hole for one retaining screw
49 Type D - keys with both ends square with hole for one retaining screw [IS]
IS 2048 (D) - 1983 		Type D - keys with both ends square with hole for one retaining screw
50 Type E - Keys with both ends round with holes for two retaining screws [IS]
IS 2048 (E) - 1983 		Type E - Keys with both ends round with holes for two retaining screws
51 Type F - Keys with both ends square with holes for two retaining screws [IS]
IS 2048 (F) - 1983 		Type F - Keys with both ends square with holes for two retaining screws
52 Type G - keys with both ends square with chamfer and hole for one retaining screw [IS]
IS 2048 (G) - 1983 		Type G - keys with both ends square with chamfer and hole for one retaining screw
53 Type H - Keys with both ends square with chamfer and holes for two retaining screws [IS]
IS 2048 (H) - 1983 		Type H - Keys with both ends square with chamfer and holes for two retaining screws
54 Type J - keys with both ends square with chamfer and hole for one spring dowel sleeve [IS]
IS 2048 (J) - 1983 		Type J - keys with both ends square with chamfer and hole for one spring dowel sleeve