Click Specification

Parallel keys - Type V

UNI 6605 - 1969

Display drawing:

Size ^①

8
×7

10
×8

12
×8

14
×9

16
×10

18
×11

20
×12

22
×14

25
×14

28
×16

32
×18

b
h
a
d₁
d₂
d₃	6H
t₃
t₅
For Nominal Thread Diameter	Filettatura × lunghezza

8	10	12	14	16	18	20	22	25	28	32
7	8	8	9	10	11	12	14	14	16	18
3	3	3	3.5	4	4.5	5	5.5	5.5	6.5	7
3.4	3.4	4.5	5.5	5.5	6.6	6.6	6.6	9	11	11
6	6	8	10	10	11	11	11	15	18	18
M3	M3	M4	M5	M5	M6	M6	M6	M8	M10	M10
2.4	2.4	3.2	4.1	4.1	4.8	4.8	4.8	6	7.3	7.3
7	8	10	10	10	12	12	12	15	17	17
M3×8	M3×10	M4×10	M5×10	M5×10	M6×12	M6×12	M6×16	M8×16	M10×16	M10×20

Size ^①

36
×20

40
×22

45
×25

50
×28

56
×32

63
×32

70
×36

80
×40

90
×45

100
×50

b
h
a
d₁
d₂
d₃	6H
t₃
t₅
For Nominal Thread Diameter	Filettatura × lunghezza

36	40	45	50	56	63	70	80	90	100
20	22	25	28	32	32	36	40	45	50
8	9	10	11	13	13	14	16	18	20
14	14	14	14	14	14	18	18	22	22
20	20	20	20	20	20	26	26	33	33
M12	M12	M12	M12	M12	M12	M16	M16	M20	M20
8.3	8.3	8.3	8.3	8.3	8.3	11.5	11.5	13.5	13.5
20	20	20	20	20	20	24	24	30	30
M12×25	M12×25	M12×30	M12×30	M12×35	M12×35	M16×40	M16×45	M20×50	M20×55

Send Inquiry

Similar Standards

1	[DIN] DIN 6885 (A) - 1968	Parallel Keys, Deep Pattern - Type A View Suppliers
2	[DIN] DIN 6885-1 (A) - 2021	Parallel Keys, Deep Pattern - Type A View Suppliers
3	[DIN] DIN 6880 - 1975	Flat Rectangular Key
4	[ISO] ISO 2491 - 1974	Thin Parallel Keys
5	[ASME/ANSI] ASME/ANSI B 18.25.3M - 1998	Metric Interference Fit Flat Key
6	[DIN] DIN 6885-1 (G) - 2021	Parallel Keys, With Taper and One Step Bore For Fixation Screw - Type G
7	[DIN] DIN 6323 (A) - 2003	Slot stones, loose - Form A
8	[DIN] DIN 6880 (C) - 2011	Flat Rectangular Key
9	[DIN] DIN 6880 - 1975	Square Key
10	[DIN] DIN 6880 (B) - 2011	Rectangular Key
11	[DIN] DIN 6885-1 (D) - 2021	Parallel Keys,With Step Bore Fore Fixation Screw - Type D
12	[DIN] DIN 6885 (H) - 1968	Parallel Keys, With Taper and Two Step Bore For Fixation Screw - Type H
13	[DIN] DIN 6323 (C) - 2003	Slot stones, loose - Form C
14	[DIN] DIN 6885 (E) - 1968	Parallel Keys, With Two Step Bores For Fixation Screw - Type E
15	[DIN] DIN 6885-1 (E) - 2021	Parallel Keys, With Two Step Bores For Fixation Screw - Type E
16	[DIN] DIN 6885 (B) - 1968	Parallel Keys, Deep Pattern - Type B
17	[DIN] DIN 6885-1 (J) - 2021	Parallel Keys, With Taper and One Step Hole For Clamping Sleeve - Type J
18	[DIN] DIN 6885 (F) - 1968	Parallel Keys, With Two Step Bores For Fixation Screw - Type F
19	[ASME/ANSI] ASME/ANSI B 18.25.1M - 1996	Metric square keys
20	[DIN] DIN 6885-1 (F) - 2021	Parallel Keys, With Two Step Bores For Fixation Screw - Type F
21	[DIN] DIN 6323 (B) - 2003	Slot stones, loose - Form B
22	[DIN] DIN 6885-1 (H) - 2021	Parallel Keys, With Taper and Two Step Bore For Fixation Screw - Type H
23	[ASME/ANSI] ASME/ANSI B 18.25.3M - 1998 (R2008)	Metric Square And Pectang-Ular Keys
24	[DIN] DIN 6885 (J) - 1968	Parallel Keys, With Taper and One Step Hole For Clamping Sleeve - Type J
25	[DIN] DIN 6885 (G) - 1968	Parallel Keys, With Taper and One Step Bore For Fixation Screw - Type G
26	[DIN] DIN 6880 - 1975	Rectangular Key
27	[DIN] DIN 6885 (D) - 1968	Parallel Keys,With Step Bore Fore Fixation Screw - Type D
28	[DIN] DIN 6885-1 (C) - 2021	Parallel Keys, with Step Bore Fore Fixation Screw - Type C
29	[DIN] DIN 6885 (C) - 1968	Parallel Keys, with Step Bore Fore Fixation Screw - Type C
30	[DIN] DIN 6885-1 (B) - 2021	Parallel Keys, Deep Pattern - Type B
31	[DIN] DIN 6880 (A) - 2011	Square Key
32	[UNI] UNI 6604 - 1969	Flat key
33	[UNI] UNI 6605 - 1969	Parallel keys - Type IV
34	[UNI] UNI 6605 - 1969	Parallel keys - Type VI
35	[GB] GB 1567 - 1979	Sguare And Rectangular Thin Keys
36	[GB] GB /T 1096 - 2003	Square And Rectangular Keys
37	[GB] GB /T 1096 - 1979	Square and Rectangular keys
38	[UNI] UNI 6605 - 1969	Parallel keys - Type III
39	[UNI] UNI 6605 - 1969	Parallel keys - Type I
40	[GB] GB /T 1097 - 2003	Square And Rectangular Keys
41	[GB] GB 1097 - 1979	Square And Rectangular Keys
42	[GB] GB /T 1567 - 2003	Sguare And Rectangular Thin Keys
43	[UNI] UNI 6605 - 1969	Parallel keys - Type II
44	[UNI] UNI 7510 - 1976	Thin parallel keys
45	[GOST] GOST 23360 - 1978	Keys couplings with prismatic Keys
46	[IS] IS 2048 (A) - 1983	Type A - Keys with both ends round
47	[IS] IS 2048 (B) - 1983	Type B - Keys with both ends square
48	[IS] IS 2048 (C) - 1983	Type C - keys with both ends round with hole for one retaining screw
49	[IS] IS 2048 (D) - 1983	Type D - keys with both ends square with hole for one retaining screw
50	[IS] IS 2048 (E) - 1983	Type E - Keys with both ends round with holes for two retaining screws
51	[IS] IS 2048 (F) - 1983	Type F - Keys with both ends square with holes for two retaining screws
52	[IS] IS 2048 (G) - 1983	Type G - keys with both ends square with chamfer and hole for one retaining screw
53	[IS] IS 2048 (H) - 1983	Type H - Keys with both ends square with chamfer and holes for two retaining screws
54	[IS] IS 2048 (J) - 1983	Type J - keys with both ends square with chamfer and hole for one spring dowel sleeve