简体 | 繁體 | FastenerExpo |
English Deutsch Français 日本語 Italiano Español 한어 Português Русский بالعربية Türkçe
All Categories

Click Specification

Unit:mm

Round Nut with Set Pin Holes Inside, ISO Metric Fine Thread

DIN 1816 - 1971

Display drawing:

德标DIN 1816 - 1971 DIN1816 1816DIN Round Nut with Set Pin Holes Inside, ISO Metric Fine Thread
Calculate weight and price. Weight 1000 pcs : kg x $ per kg = $ 1000 pcs
Default density g/cm3
×

Choose materials based on density.(g/cm3)

  • Carbon Steel 7.85
  • Stainless Steel 8.1
  • Stainless Steel 7.95
  • Stainless Steel 7.7
  • Titanium Alloy 4.5
  • Aluminum Alloy 2.8
  • Copper 8.89


Select here or enter material density on the calculation page.
Screw Thread
d
M6 M8 M10 M12 M14 M16 M18 M20 M22 M24 M26 M28 M30
P Pitch
dk max
min
d1
d0 max
min
k max
min
t
h
number of holes
per 100 units ≈ kg
0.75 1 1 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5
16 20 25 28 30 32 34 36 40 42 45 50 50
15.89 19.87 24.87 27.87 29.87 31.84 33.84 35.84 39.84 41.84 44.84 49.84 49.84
12 16 20 23 25 27 28 30 34 36 38 43 43
2.56 2.56 3.06 3.06 4.075 4.075 4.075 4.075 4.075 4.075 5.075 5.075 5.075
2.5 2.5 3 3 4 4 4 4 4 4 5 5 5
5 5 6 6 7 7 8 8 9 9 10 10 10
4.7 4.7 5.7 5.7 6.64 6.64 7.64 7.64 8.64 8.64 9.64 9.64 9.64
4 4.5 4.5 5 5 6 6 6 6 6 6 7 7
0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5
4 4 4 4 4 4 4 4 4 4 4 4 4
0.595 0.95 1.81 2.23 2.88 3.12 3.92 4.25 6.05 6.45 8.1 10.3 9.55
Screw Thread
d
M32 M35 M38 M40 M42 M45 M48 M50 M52 M55 M58 M60 M62
P Pitch
dk max
min
d1
d0 max
min
k max
min
t
h
number of holes
per 100 units ≈ kg
1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5
52 55 58 62 62 68 75 75 80 80 90 90 95
51.81 54.81 57.81 61.81 61.81 67.81 74.81 74.81 79.81 79.81 89.78 89.78 94.78
45 48 50 54 54 60 67 67 70 70 80 80 85
5.075 5.075 5.075 6.075 6.075 6.075 6.075 6.075 6.075 6.075 6.075 6.075 8.09
5 5 5 6 6 6 6 6 6 6 6 6 8
11 11 11 12 12 12 13 13 13 13 13 13 14
10.57 10.57 10.57 11.57 11.57 11.57 12.57 12.57 12.57 12.57 12.57 12.57 13.57
7 7 8 8 8 8 10 10 10 10 10 10 12
0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5
4 4 4 4 4 6 6 6 6 6 6 6 6
11.1 12 12.7 16.2 15 18.5 25.6 24.1 28.6 26.1 37 35.1 42.3
Screw Thread
d
M65 M68 M70 M72 M75 M80 M85 M90 M95 M100 M105 M110 M115
P Pitch
dk max
min
d1
d0 max
min
k max
min
t
h
number of holes
per 100 units ≈ kg
1.5 1.5 1.5 1.5 1.5 2 2 2 2 2 2 2 2
95 100 100 110 110 115 120 130 135 145 155 155 165
94.78 99.78 99.78 109.78 109.78 114.78 119.78 129.75 134.75 144.75 154.75 154.75 164.75
85 90 90 100 100 105 110 120 120 130 140 140 150
8.09 8.09 8.09 8.09 8.09 8.09 8.09 8.09 8.09 8.09 8.09 8.09 10.09
8 8 8 8 8 8 8 8 8 8 8 8 10
14 14 14 14 14 16 16 16 16 16 16 16 18
13.57 13.57 13.57 13.57 13.57 15.57 15.57 15.57 15.57 15.57 15.57 15.57 17.57
12 12 12 12 12 12 12 12 12 12 12 12 15
0.5 0.5 0.5 0.5 0.5 1 1 1 1 1 1 1 1
6 6 6 6 6 6 6 6 6 6 6 6 6
39.2 44 41.5 57.4 53.6 57.5 68 84.3 87.5 106 125 114 149
Screw Thread
d
M120 M125 M130 M140 M150 M160 M170 M180 M190 M200
P Pitch
dk max
min
d1
d0 max
min
k max
min
t
h
number of holes
per 100 units ≈ kg
2 2 3 3 3 3 3 3 3 3
165 180 180 195 205 220 230 245 260 270
164.75 179.75 179.75 194.71 204.71 219.71 229.71 244.71 259.68 269.68
150 165 165 180 190 205 210 225 240 250
10.09 10.09 10.09 10.09 10.09 10.09 10.09 10.09 10.09 10.09
10 10 10 10 10 10 10 10 10 10
18 18 18 18 18 20 20 20 20 22
17.57 17.57 17.57 17.57 17.57 19.48 19.48 19.48 19.48 21.48
15 15 15 15 15 15 15 15 18 18
1 1 1 1 1 1 1 1 1 1
6 8 8 8 8 8 8 8 8 8
136 178 167 200 212 277 291 336 381 442
Send Inquiry

Similar Standards

1 Groove Nuts [DIN]
DIN 70852 - 1989 		Groove Nuts
2 Locknut of Type KM..., KML... or HM...T,for Use With Type MB... Lockwasher as in Din 5406 [DIN]
DIN 981 (KM) - 2009 		Locknut of Type KM..., KML... or HM...T,for Use With Type MB... Lockwasher as in Din 5406
3 Slotted Round Nuts For Hook Spanner, ISO Metric Fine Thread [DIN]
DIN 1804 - 1971 		Slotted Round Nuts For Hook Spanner, ISO Metric Fine Thread
4 Round Nuts With Drilled Holes In One Face [DIN]
DIN 547 - 2006 		Round Nuts With Drilled Holes In One Face
5 Slotted Round Nuts [DIN]
DIN 546 - 2010 		Slotted Round Nuts
6 Locknut of type HM .. . , for use with type MS ... locking plate as in DIN 5406 [DIN]
DIN 981 (HM) - 2009 		Locknut of type HM .. . , for use with type MS ... locking plate as in DIN 5406
7 Locknut Dimensions Inch Design Series N-00, AN-00, TN and TAN [ANSI]
ANSI /ABMA 8.2 - 1999 		Locknut Dimensions Inch Design Series N-00, AN-00, TN and TAN
8 Slotted round nuts [DIN]
DIN 546 - 1986 		Slotted round nuts
9 Locknuts With 8 Slots [ISO]
ISO 2982-2 - 2013 		Locknuts With 8 Slots
10 Locknut With 4 Slots [ISO]
ISO 2982-2 - 2013 		Locknut With 4 Slots
11 Round nuts with drilled holes in one face [DIN]
DIN 547 - 1986 		Round nuts with drilled holes in one face
12 Rolling bearings - Locknuts [DIN]
DIN 981 (KM) - 1983 		Rolling bearings - Locknuts
13 Round nuts with set pin holes in side [DIN]
DIN 548 - 1986 		Round nuts with set pin holes in side
14 Round nuts with set pin holes in side [DIN]
DIN 548 - 2007 		Round nuts with set pin holes in side
15 Shaft collar axle flande mounting shaft collar [DIN]
DIN 703 - 1955 		Shaft collar axle flande mounting shaft collar
16 Cargo lifting gear - Accessories and fittings for lifting - Round nuts [DIN]
DIN 82013 - 2010 		Cargo lifting gear - Accessories and fittings for lifting - Round nuts
17 Locknut Dimensions Inch Design Series N-000 [ANSI]
ANSI /ABMA 8.2 - 1999 		Locknut Dimensions Inch Design Series N-000
18 Removal Nut Dimensions Inch Design Series RN and ARN [ANSI]
ANSI /ABMA 8.2 - 1999 		Removal Nut Dimensions Inch Design Series RN and ARN
19 Locknut of type HM .. . , for use with type MS ... locking plate as in DIN 5406 [DIN]
DIN 981 (HM) - 1993 		Locknut of type HM .. . , for use with type MS ... locking plate as in DIN 5406
20 Locknut of Type KM..., KML... or HM...T,for Use With Type MB... Lockwasher as in Din 5406 [DIN]
DIN 981 (KM) - 1993 		Locknut of Type KM..., KML... or HM...T,for Use With Type MB... Lockwasher as in Din 5406
21 Rolling Bearing Accessories - Locknuts - HML Series [GB]
GB 9160.3 (HML) - 1988 		Rolling Bearing Accessories - Locknuts - HML Series
22 Rolling Bearing - Locking Clips - MS Series [GB]
GB /T 9160.2 (MS) - 2017 		Rolling Bearing - Locking Clips - MS Series
23 Rolling Bearing Accessories - Locknuts - KM Series [GB]
GB /T 9160.2 (KM) - 2017 		Rolling Bearing Accessories - Locknuts - KM Series
24 Slotted Round Nuts [GB]
GB 817 - 1988 		Slotted Round Nuts
25 Rolling Bearing Accessories - Locknuts - KML Series [GB]
GB 9160.3 (KML) - 1988 		Rolling Bearing Accessories - Locknuts - KML Series
26 Round Nuts With Drilled Holes In One Face [GB]
GB 815 - 1988 		Round Nuts With Drilled Holes In One Face
27 Rolling Bearing - Locking Clips - MSL Series [GB]
GB /T 9160.2 (MSL) - 2017 		Rolling Bearing - Locking Clips - MSL Series
28 Locknuts - Heavy Series [NF]
NF E 22-111 - 1969 		Locknuts - Heavy Series
29 Small Round Nuts [GB]
GB 810 - 1988 		Small Round Nuts
30 Rolling Bearing Accessories - Locknuts - KML Series [GB]
GB /T 9160.2 (KML) - 2006 		Rolling Bearing Accessories - Locknuts - KML Series
31 Slotted Round Nuts [NF]
NF E 27-413 - 1959 		Slotted Round Nuts
32 Rolling Bearing - Locking Clips - MSL Series [GB]
GB /T 9160.2 (MSL) - 2006 		Rolling Bearing - Locking Clips - MSL Series
33 Rolling Bearing Accessories - Locknuts - HML Series [GB]
GB /T 9160.2 (HML) - 2006 		Rolling Bearing Accessories - Locknuts - HML Series
34 Rolling Bearing - Locking Clips - MS Series [GB]
GB /T 9160.2 (MS) - 2006 		Rolling Bearing - Locking Clips - MS Series
35 Rolling Bearing Accessories - Locknuts - KML Series [GB]
GB /T 9160.2 (KML) - 2017 		Rolling Bearing Accessories - Locknuts - KML Series
36 Round Nuts [GB]
GB 812 - 1988 		Round Nuts
37 Rolling Bearing Accessories - Locknuts - KM Series [GB]
GB /T 9160.2 (KM) - 2006 		Rolling Bearing Accessories - Locknuts - KM Series
38 en:Rolling Bearing Accessories - Locknuts - HM Series [GB]
GB /T 9160.2 (HM) - 2006 		en:Rolling Bearing Accessories - Locknuts - HM Series
39 Rolling Bearing Accessories - Locknuts - HM Series [GB]
GB /T 9160.2 (HM) - 2017 		Rolling Bearing Accessories - Locknuts - HM Series
40 Locknuts with 8 slots [JIS]
JIS B 1554 (AN/ANL) - 2016 		Locknuts with 8 slots
41 Locknuts with 4 slots [JIS]
JIS B 1554 (AN,HN/ANL,HNL) - 2016 		Locknuts with 4 slots
42 Rolling Bearing Accessories - Locknuts - HML Series [GB]
GB /T 9160.2 (HML) - 2017 		Rolling Bearing Accessories - Locknuts - HML Series
43 Rolling Bearing Accessories - Locknuts - HM Series [GB]
GB 9160.3 (HM) - 1988 		Rolling Bearing Accessories - Locknuts - HM Series
44 Round Nuts With Set Pin Holes In Side [GB]
GB 816 - 1988 		Round Nuts With Set Pin Holes In Side
45 Rolling Bearing Accessories - Locknuts - KM Series [GB]
GB 9160.3 (KM) - 1988 		Rolling Bearing Accessories - Locknuts - KM Series
46 Slotted round nuts, product grade A [GOST]
GOST 11871 - 1988 		Slotted round nuts, product grade A
47 Round Nuts With Set Pin Holes In Side [CNS]
CNS 4433 - 1993 		Round Nuts With Set Pin Holes In Side
48 Round Nuts With Drilled Holes In One Face [CNS]
CNS 4434 - 1993 		Round Nuts With Drilled Holes In One Face
49 Round Nuts [CNS]
CNS 4465 - 1978 		Round Nuts